 |
Photo of the fairing pieces and the Gustafsson windscreen. The Airtech fairing, seat and homemade fuel tank are in primer and ready for paint. The AirTech pieces needed only to be sanded with some 220 and 400 grit sandpaper and then primed. The homemade fiberglass tank was a real pain in the butt, the construction of which was to complex to go into right now. The Gustafsson windscreen is made for the AirTech MT125 fairing and fits nicely, it is a high quality piece, about $100. |
 |
Painted faring pieces. Three coats of PPG Durathane base coat topped with three coats of PPG Concept Clear Coat. I highly recommend these products if you have the proper equipment. |