Kitaco Race Ignition

ignition-1.jpg (33983 bytes) The Kitaco race only ignition system. A beautiful piece of work.. includes stator coil, trigger, cdi unit, coil, coil wire, plug cap, kill button, inner rotor , all wiring and orings required.
ignition-2.jpg (19741 bytes) All the stuff replaced by the Kitaco ignition. These parts weigh  6.2 lbs, the Kitaco parts weigh 2 lbs.
ignition-3.jpg (29621 bytes) Kitaco system installed.. presto.. no points, no battery, no problems. Adjustable timing, almost unlimited rev range, nothing to wear out or need tuning, lighter, better, stronger and about $200 US.

Once again thanks to Richard at Ardjuna Racing for advice and assistance in obtaining the needed parts.
Ignition-KitacoRace-10-02-1.jpg (48760 bytes) Close up photo of the installed Kitaco system. This photo was taken after a full race season of use. So far the ignition has performed flawlessly. I have not had to make one change or adjustment since it was installed.